UWMC-Z04
Wall mounted lighting controller for LED lighting applications that enables control of the fixtures for on / off or dimming functions. It replaces a double gang switch with all features, and provides more thanks to its wireless interface. The wall mounted controller is so smart, it teaches the rest of the system about the zone it is located in. The entire zone is capable of managing itself without requiring any infrastructure.
Whatever happens in the zone, stays in the zone.
Distributed intelligence, with no infrastructure required
Universal wall mounted lighting controller UWMC-Z04 is a highly integrated device with an 480 pixels by 480 pixels LCD display attached to a powerful computing platform. It also has power management functions and is powered from a 110V to 220V supply.
The wall mounted controller fits in the standard double gang switch opening; it can replicate the on/off function of double gang lighting switches for up to 200 W of power from each relay output.
As the controller is powered from an AC supply, a neutral connection is required. The L line input, L1 and L2 load outputs should share the same neutral N while installing the controller unit. When the power is applied for the first time to this controller, a proprietary application automatically launches and governs not only the configuration of the controller, but also navigates the user who is installing the lighting system through the setup of the zone and the load controllers for the lighting fixtures.
Item | Specification |
Supply | 100 ~ 240 VAC, 50/60Hz |
Screen | 4 inch, 480 X 480 pixels, multi-touch IPS (responsive screen with wide viewing angle) |
Ethernet | 10M / 100M Adaptive |
RS485 | Half-duplex over 3.81mm terminals |
Relay Load Capacity | L1, L2 <=200 W each |
Wireless Protocols | Proprietary 2.4GHz ISM Band |
Working Temperature | 32˚F ~ 104˚F |
Working Humidity | 5% ~ 90% RH |
| Wall Mounted Display Dimensions | ||
|---|---|---|
| Overall Mounting Cavity Size on Mud: | ||
| 3 3/16 “ | 3 3/16 “ | 1 ½” |
| 81mm | 81mm | 36mm |
| Mud Thickness: | ||
| 0.2” (5mm) | ||
| Mounting Cavity size below Mud: | ||
| 3″(77mm)) | ||
| LCD Face Size: | ||
| 3 3/8 “ | 3 3/8 “ | 7/16” |
| 86mm | 86mm | 11mm |
Individual ULDC Control
Connect your ULDC to one or more lighting fixtures. With CRIB’s Intercal8 application you can turn your light(s) on/off and control the dimming level.
Wireless connection
CRIB’s ULDC-T can receive control signals wirelessly from the gateway/wall unit; as well as over-the-air updates for firmware.
Wired connection (over RS-485)
The ULDC also accepts wired connections, using Modbus protocols over RS-485
Zone controls (or multiple ULDC controls)
Install multiple ULDCs within range of your gateway(s). Set up the ULDCs you want to control, which simultaneously link with your lighting fixture(s). Once setup is complete, you can control the lights in the zone individually per ULDC, or you can control multiple ULDCs at once.
Scenes
Whether you are using single-way or multiple-way controls, the Intercal8 app allows you to set custom scenes for different times of the day, and different zones/groups of lights. Have your bedroom lights gradually increase when you wake up, manage dimming levels throughout the day, or set different configurations for different zones.
Occupancy Enabled controls
For ULDC models including a PIR sensor, the Intercal8 app allows you to enable/disable occupancy controls, regulate different dimming intensities for motion detected/undetected, or manage the time delay after motion is detected.
PRODUCTS DESCRIPTION
One or more wall mounted controllers can co-exist in a given zone for multi-way controls. Its user interface is user friendly with minimal cognitive load and at the same time, the UI adapts to the ambient conditions such as the lighting level in the zone. Although there is not much room for improvement, we are always open to customizing the UI for this controller to fit your exact needs.
LEARN MORE ABOUT CRIBLIGHTING
CRIB Lighting respects your personal information and keeps it safe. By sending this form, you consent to allow CRIB Lighting to store and process your personal information as stated in our Privacy Policy. Please contact us at info@criblighting.com for a copy of our privacy policy.
