Agencies & Installers
Whether you are a distributor working with installers, or you provide the installation
service as a part of the MEP implementation, you will receive unrivaled value by using our product line.
Whether you are a distributor working with installers, or you provide the installation service as a part of the MEP implementation, you will receive unrivaled value by using our product line.
Developed by professionals with decades of experience in creating buildings that are one of a kind, our user interfaces look beautiful. Our products will be the centerpiece of your showroom.
We take pride in having developed our systems for the easiest installation possible, with minimum steps required for a smart lighting system, with the installer and lighting agencies in mind.
Our systems are designed with the flexibility of use within each zone, without interfering with any other system. Lighting, security and climate are all controlled from one wall mounted unit, for each room or zone. If you would like to start with a single room or zone, deploy it for one, and see how easy we make it to control your space.
If you are remodeling the best return on your investment is lighting for bringing a modern look and setting the tone in your space according to the occasion.
If you are remodeling the best return on your investment is lighting for bringing a modern look and setting the tone in your space according to the occasion.
If your success depends on quick and easy deployment of lighting controls, and you need your wall mounted controllers to be pre-configured with zone, group or lighting fixture names that are available out of the box in each room, please contact our projects department. We are happy to work with you to streamline your lighting deployment.
Multiway controls are embedded in our architecture. There is no additional wiring, connection for a second, third or more controllers to be added to a zone, they all work in tandem by architecture, even with your CRIB Lighting mobile application.
If you are after simplicity for the end user, we offer the smart lighting solution without any tie-ins to third party systems or subscriptions. Our system uses cutting edge technology, free of infrastructure requirements, and offers the conveniences of any wireless lighting system and more.
Our smart lighting system is designed for scale. To scale up the system by adding remote monitoring, remote controls, and other smart building technologies, we are with you. Extensible to energy storage, climate controls and security, our solution is one of a kind. Get in touch with us to see how we can make you a part of the value chain.
You do not need to have an already installed wireless or wired network to operate our intelligent lighting systems. CRIB Lighting system is designed for zone by zone or room by room controls with built-in wireless connections. For initial deployment, you do not have to set up a separate wireless network, connect to the internet, or put in any extra effort to deploy a third party hardware or software to get your lighting system up and running.
We are all about wireless communications, so we save you most of the communication cabling cost. Our multi-way controls do not require additional cabling. Add as many control units as you like to a zone, they will all operate in tandem.
Our Wall Mounted Controllers feature relay outputs to turn on and off circuits, replicating the functions of the double gang switches that they replace. Furthermore, the RS-485 output is used as a DMX encoder, and the ULDC-X load controllers are configured as DMX encoders and decoders depending on the application.
Our architecture features a self healing and self configuring capability. Conveniently add a new device or easily replace a device in the system.
Required by code or not, our lighting system includes occupancy sensors that help the end user save in energy cost, as well as offering the convenience of turning the lighting on, off or adjusting the lighting at a desired illumination level. Timers are built-in and can be adjusted from the wall mounted control units for each light. What is unique about the system is you do not need to run wires for additional occupancy sensors and multiple sensors can control one light, or multiple lights can be controlled by one sensor. Our product portfolio features wireless occupancy sensors that can be placed at strategic points inside a space, alternatively you can choose a load controller with an integrated occupancy sensor which is typical for commercial installations of high bay or low bay lights.
If your application is commercial lighting, our load controllers can be attached to the luminaires and offer adjustable dimming levels based on detected activity.
You can configure your lighting system to react to motion outside your home by randomly turning the lights on and off and providing a feel of occupancy when you are away. If configured, you can arm your system to detect motion inside your home while you are away, and receive alerts regarding the possibility of a potential breach.
If you are installing lighting in commercial buildings, the easiest and most affordable emergency signaling and broadcast method is using networked technologies. Once one of the wall mounted lighting controllers is triggered due to an emergency, the entire building is alerted. If your lighting works everyday, this means that your emergency warning system is up and running everyday, keeping the occupants of the building safe.
The character of any building that uses mood lighting can be changed on a moment's notice. You can have your guests walk into a different ambiance every time you host, or simply celebrate by picking a color scheme for the occasion by using colorful, dynamic and mood setting colors and light shows.
Our products operate best with LED lighting that saves you energy and time. If you are installing in or running a commercial operation, anytime you need to change a lighting element is lost time and lost money from your operation. LEDs, due to their reliability save the most amount of dollars due to the long lifespan. These savings are in addition to the intrinsic efficiency and energy cost savings nature of LED lighting elements.
Our UWMC-X04 product comes with a DMX interface which is suitable for RGB or RGBW (color or hue controllable) outdoor lighting applications with wired or wireless controls. Simply install the unit indoors and control the landscape with ever changing colors outdoors. An integrated set of relays can also control the power delivery to your fixtures while you are able to control the color or hue in each individual fixture.
Not all fixtures are created equal. By assigning the non-dimmable fixtures to the relay outputs, you can remain in control of the entire set of lighting fixtures in your application from one controller.
